Your HVAC filter is one of the last things you think about when it comes to home maintenance, but replacing it might be more complicated than you realize. Mistakes can compromise your system’s energy efficiency or even make for Commercial Air Duct Cleaning Atlanta in your home.
The HVAC system in your home is important, especially if you happen to live somewhere like Atlanta, where the weather can be anything but predictable. The following introduction is designed to take you through a list of common filter change mistakes and how to learn from them so that your system performs correctly and maintains home comfort throughout the year.
Why Is Proper Filter Replacement So Important?
Your filter is very important to the quality of your air and how much or little. A filthy or ill-fitting filter will only make your system work harder, upping the energy bills and possibly causing a breakdown. The short answer is that a small mistake here can create some major problems for you down the line.
● Mistake 1: Choosing the Wrong Filter Size
Choosing the wrong filter size is one of the most frequent faults. You probably think to yourself, “Close enough oughta work.” Alas, that is not the case. If the filter is too small, then it will allow unfiltered air to bypass, causing dirt and debris in your system. Alternatively, a filter that is too big might not fit easily and leak air.
How to Prevent It: You should either look at the manual of your HVAC system, or you need take a glance at an old filter. If you are unsure, and to be safe, consult a professional.
● Mistake 2: Ignoring the Filter’s MERV Rating
A MERV rated filter tells you how good it is at capturing particles. A higher MERV is better filtration but it may come at a cost of airflow if your system isn’t designed for. Most homeowners get the highest MERV-rated filter they can, which logically must be better right? Only now they have to worry every month or so if their system is having a hard time pushing air through.
How to Prevent It: Maintain your balance of efficiency and compatibility. Select a MERV rating that is right for your system. The ideal MERV rating for most homes falls between 8 and 13.
● Mistake 3: Replacing the Filter Too Infrequently
It can be easy to forget about your HVAC filter. Out of sight, out of mind, correct. Failure to do so can result in a dirty filter, obstructing airflow and causing the system to lose efficiency or even be damaged after being run for an extended period.
How to Prevent It: Establish a monthly reminder on your phone or calendar to check the filter. In general, you should change filters every 1-3 months depending on how often your HVAC is used and the air quality in your area.
● Mistake 4: Installing the Filter Incorrectly
If you have the correct filter, installing it backward completely negates its effectiveness. The filter captures particles in the incoming airflow. Even if it is installed incorrectly, the filter will still capture some of those particles but not as effectively, which, in part, leads to reduced indoor air quality.
How to Prevent It: Always use the side of a filter with an arrow showing which direction air is supposed to flow through. Far too many replacement filters are inserted backward every day. It should be facing the direction of the motor or furnace.
Final Words
With easy tasks such as replacing your HVAC filter, it could be easily overlooked. However, doing this step right can prevent bigger problems later on. Avoid these common errors, and your system will run smoothly to give you clean, fresh air. When it comes to professional Ductwork Installation in Atlanta or HVAC Filter Replacement, Atlanta Hurricane LLC is here to help.