Filtering the water throughout your house can be a great idea especially if your place is big and the consumption is way beyond drinking and cooking. While normally point-of-use filters remain limited to kitchen, a whole house filter would be able to give you clean water at every outlet. Such filtration systems are typically connected to the main supply which provides water to kitchen, laundry, bathtubs, showers and toilets.
If you have decided to get the best residential water filtration system for you house in Sarasota FL, there are still a number of factors that you should consider before choosing the service. Opting for the right choice can impact the quality and the amount of water which will flow in your house. Besides that, you should also look for credibility and the reputation of the selected company.
Following are the tips that can help you identify your requirement.
1. What Type Of Whole House Filter Do You Really Need?
First of all, you’ll have to consult a professional in order to find out the type of contaminants that you need to remove from water flowing into the house. If your water connection is managed by a municipal service, the common contaminants found there are sediments, chlorine, minerals and chemicals.
But if the water has to come from a private water well to your house, the filtration system will have to remove all sorts of hardness minerals, iron and sediment. The amount of these contaminants also vary from mild to toxic, depending upon your area.
2. Measure The Flow Rate
For better understanding, the flow rate is the quantity of water that runs through your dispensers and appliances. It is measured in gallons/minute and manufacturers usually specify the demand on every appliance and water dispenser that you buy for your house. For instance, water coming out of shower-head is 2.5-5 gallons per minute whereas dishwashers and toilets run at a flow rate of 5 gpm and 3 gpm respectively.
The calculation also depends upon the size of your family. Adding together with number of water dispenser and the flow rate of each of them, you will have the desired flow rate that your whole house filter should have.
If the flow rate is lower than the specified rate, this will result into unnecessary interruptions and low pressure during the peak time.
3. Identify The Size That You Want
The ideal size for a normal house is 4.5″x 20″ but in case of larger setups, you’ll have to look for filters with a flow rate of 25gpm and 1 1/2 -inch ports. Large filters come up with the perks of increased water supply and longer service period. But overall, it also depends upon the port size of the filter.
4. Know The Life Of Your Whole House Water Filter
The life of the filter will be very much based upon the quality and quantity of sediments that you want to remove from water coming out from various taps in your house. You should also maintain records of filter changes for a better estimates.
5. Find NSF Certified Filter Systems
If you have ticked off all the important factors stated above, then the last requirement is the most basic in the list. No matter what size and quality of filter you are going to buy, always make sure that it is properly NSF Certified. Checking the seal can be one way to ensure that the water purification system which you want to install is tested and approved by authorities.
Whether you are going to replace your old whole house water filter in Sarasota FL or want to buy a new one, these are the tips that you should follow for state safety and protection rules, as well as finding the most efficient filtration system.